Thinking about a stamped concrete patio? It gives you the look of natural stone, brick, or slate without the price tag of the real thing. But “how much does a stamped concrete patio cost?” depends on the size of the patio, the pattern and colors you choose, and what your backyard access looks like. This guide breaks down 2026 stamped concrete patio pricing for the Colorado Springs area so you can budget with confidence.
In Colorado Springs, a plain broom-finish concrete patio runs about $20 per square foot at a typical patio size (large pours drop to $12-15). Stamped concrete costs considerably more, commonly 1.25 to 2 times the plain-concrete price, because of the color, release agent, stamping labor, and sealer involved. A popular 20×20 patio (400 sq ft) lands roughly $10,000 to $16,000 stamped, depending on pattern and color complexity. Every stamped project is quoted individually, and we price all projects at a $6,500 minimum.
Stamped Concrete Patio Cost Per Square Foot
Start with the baseline: plain broom-finish concrete at about $20 per square foot, which includes grading, forming, 4,000 PSI air-entrained concrete, fiber rebar reinforcement, finishing, and cleanup. Stamping adds integral color in the mix, a colored release agent on the surface, the labor of pressing and detailing the pattern before the concrete sets, and a sealer coat after it cures. That’s why stamped work commonly runs 1.25 to 2 times the plain price.
Within stamped pricing, the swing comes from labor time, not materials. Stamp mats are reusable. A single pattern in one earth-tone color is the fast end. Detailed patterns, two-tone color work, hand-tooled joints, and contrasting borders all take longer to lay out and detail, and Colorado’s dry air leaves less margin for error, so the crew has to work fast and precisely.
How Much Does a 20×20 Stamped Concrete Patio Cost?
A 20×20 patio (400 square feet) is one of the most popular sizes in Colorado Springs, big enough for a dining table, seating, and a grill without taking over the yard. In plain broom finish it runs about $8,000. Stamped, expect roughly $10,000 to $16,000, with the low end for a single pattern and one color and the high end for detailed patterns, multiple colors, and borders.
Mobilization, forming, stamping setup, and cleanup cost about the same whether the patio is 150 or 400 square feet, so smaller patios run higher per square foot. We price every project at a $6,500 minimum. If you’re planning a small stamped patio, pairing it with steps or a walkway in the same pour is the way to get the most out of that minimum.
What Affects Your Stamped Patio Price
1. Color
Integral color is priced by the yard of concrete and varies a lot by pigment. Earth tones like tan, sandstone, and buff are the most affordable and the most popular; they also look right against Colorado’s landscape. Dark grays, charcoals, and blacks cost several times more in pigment. Two-tone work (a contrasting release color or accent areas) adds labor on top.
2. Borders and Accent Bands
A contrasting border in a different pattern or color frames the patio and is one of the best-value upgrades: small area, big visual impact. Stamped borders typically run $8-15 per linear foot.
3. Backyard Access
This is what separates patio pricing from driveway pricing. A concrete truck can back right up to a driveway. Most patios are behind the house. If the truck can’t reach the pour, a concrete pump truck adds roughly $650 to $850. A wide side gate or rear access saves that cost. What you don’t want is a contractor who skips the pump and wheelbarrows a stamped pour through the gate to save that money. See below for why.
4. Grading and Drainage
Most Colorado Springs lots have sandy, well-draining native ground that just needs to be graded and compacted. That’s included. What adds cost is fixing the yard’s slope: water must fall away from your house at least 1/8 inch per foot, and if the yard runs toward the foundation, correcting the grade before pouring is essential. Significant regrading runs $1,000 to $3,000. Channel drains are about $65 per linear foot. Removing an existing patio adds dump fees plus demo labor.
5. Steps
If the patio meets a door above grade, you’ll need steps. Each step adds roughly $250 for forming and hand-finishing, and stamped steps take extra care because the pattern and color wrap the risers.
6. Sealer
Sealing isn’t optional on stamped concrete. It protects the color from Colorado’s high-altitude UV and deepens the finish. The first sealing is included in our stamped pricing, applied about three weeks after the pour. Plan to reseal every 2-3 years.
Stamped Concrete vs. Plain Concrete vs. Pavers
- Plain broom-finish concrete: About $20 per square foot on a typical patio, less on large pours. Durable, practical, and the baseline everything else is measured against.
- Stamped concrete: Commonly 1.25-2x plain. Seamless surface, no joints for weeds, integral color that runs through the slab. Repairs are hard to match exactly.
- Pavers: Typically $18-35 per square foot installed. Individual units can be replaced, but joints need re-sanding and weed control, and pavers can shift and settle.
For most Colorado Springs homeowners, stamped concrete delivers most of the visual impact of pavers or natural stone with a seamless surface and less ongoing upkeep.
Popular Stamped Patio Patterns
Two patterns account for almost every stamped patio we pour in Colorado Springs:
- Ashlar slate — Rectangular stone shapes in varying sizes with a slate texture. Clean, natural, and works with every home style. The most popular pattern here by a wide margin.
- Roman slate — A slate texture without the strong rectangular grid, so it reads as one continuous stone surface. Looks natural, hides minor variation well, and is the second most requested pattern.
Other patterns exist (random flagstone, wood plank, herringbone brick, European fan cobblestone), but they’re rarely chosen, and the busier ones cost more because they take longer to lay out and detail. If you’re unsure, ask to see completed ashlar and roman slate patios before looking further.
Two Pour-Day Mistakes That Ruin Stamped Patios
Stamped concrete is less forgiving than a broom finish. The whole slab has to be at the same stage of set when the mats go down, and the color has to be consistent from one end to the other. Two shortcuts on pour day wreck both, and you can watch for them from the back porch.
Adding too much water to the truck
Wet concrete is easier to push around, so a crew in a hurry will run the hose into the drum until it flows. Every gallon of water added per cubic yard costs roughly 150 to 200 PSI of strength and adds shrinkage, which means more cracking later. On stamped concrete it’s worse: extra water lightens integral color, and since each truckload gets a different amount, you end up with a patio that’s two or three different shades. That can’t be un-mixed, only covered with tinted sealer or stain that has to be re-applied. A single measured water addition to a load that arrived too dry, recorded on the delivery ticket before the pour starts, is legitimate. Unmeasured hose water mid-pour, on every load, is not.
Wheelbarrowing instead of pumping
When a truck can’t reach the backyard, the right answer is a pump. The wrong answer is a line of wheelbarrows through the side gate. A wheelbarrow crew places concrete slowly, so the first concrete on the ground is already stiffening while the last of it is still in the truck. Colorado’s dry air and sun speed that up. By the time the crew starts stamping, one end of the patio takes the pattern cleanly and the other end has set too far to take it at all. The result is uneven pattern depth, blotchy color, and cold joints where the pours didn’t knit together. A pump costs a few hundred dollars more. A patio with a half-stamped corner costs a tear-out.
Watch the chute and the crew. If the driver keeps adding water without measuring it, or the concrete is coming through the gate one wheelbarrow at a time on a stamped job, say something before the mats come out. Both problems are permanent once the concrete sets.
How to Save on a Stamped Patio Without Cutting Corners
- Choose a simpler pattern and an earth-tone color. Ashlar slate in tan or buff is the most affordable combination and the most popular for a reason.
- Use a hybrid design. Pour the main field in colored broom-finish concrete and add a stamped border. You get the design impact at the edges without stamped pricing on every square foot.
- Combine projects. Pouring the patio with steps or a walkway shares the crew day, the truck, and the setup.
Never save money by pouring thinner than 4 inches, skipping reinforcement, accepting a lower-PSI or non-air-entrained mix, or skipping the pump on a backyard pour. Those shortcuts crack within a few years, and replacing a stamped patio costs far more than doing it right once. Save on aesthetics if you need to, not on the slab.
What Should Be in Your Stamped Patio Quote
- Removal of existing material and grading
- 4,000 PSI air-entrained concrete at 4″ minimum thickness
- Fiber rebar reinforcement: actual bars in a tied grid, not loose fibers in the mix
- Integral color, release color, and pattern, each specified by name
- Control joint placement
- Sealer application
- Cleanup and workmanship warranty terms
If a quote just says “stamped concrete patio, $X” without the pattern, colors, thickness, and reinforcement spelled out, you can’t compare it with anything. The cheapest quote is usually the one leaving the most out.
Common Questions About Stamped Patio Costs
How much more does stamped concrete cost than regular concrete?
Plain broom-finish concrete in Colorado Springs runs about $20 per square foot. Stamped commonly runs 1.25 to 2 times that, so on a 400 sq ft patio the stamped upgrade is roughly $2,000 to $8,000 over plain.
Can I stamp just part of my patio to save money?
Yes, and it’s one of the smartest ways to save. A colored broom-finish patio with a stamped border gives you the framed, custom look at a fraction of the cost of stamping the whole surface.
How long does a stamped concrete patio last in Colorado?
Properly built and resealed every 2-3 years, 25 to 30 years or more. The slab is the same 4,000 PSI air-entrained concrete with fiber rebar as any quality pour; the pattern and color are part of the concrete, not a coating that wears off.
Get Your Free Stamped Patio Estimate
Request Free QuoteRelated: Stamped Concrete Services | Concrete Patio Services | Stamped Concrete Guide | Concrete Patio Cost Guide
Creststone Concrete serves homeowners throughout Colorado Springs, Monument, Castle Rock, Parker, Lone Tree, and the I-25 corridor with quality stamped concrete patios, driveways, walkways, and decorative concrete. Call (719) 631-2660 or request a free estimate online.
Prices in this guide reflect 2026 market rates for the Colorado Springs area and assume proper installation for local conditions. All quotes from Creststone Concrete include 4,000 PSI air-entrained concrete, #3 fiber rebar reinforcement, and (for stamped work) sealer as standard. Actual costs may vary based on specific project requirements, material costs, and site conditions. Always get multiple detailed, written estimates for your specific project.
